قسم الهندسة النووية

المزيد ...

حول قسم الهندسة النووية

تم إنشاء قسم الهندسة النووية كأحد أقسام كلية الهندسة عام 1974م وتم قبول أول دفعة في العام الدراسي 1977م كما شهد عام 1981م تخريج أول دفعة. ويهدف قسم الهندسة النووية وهو القسم الوحيد بالجامعات الليبية إلى إعداد الكفاءات العلمية المؤهلة والقادرة على استيعاب التطورات التي تحدث في مجال العلوم النووية المساهمة في إدخال أساليب التقنية النووية وتطويعها للاستخدامات السلمية في كافة المجالات ذات العلاقة.

شعب القسم: يضم القسم حالياً شعبتين هما:  شعبة الطاقة وتهتم باستخدامات المفاعلات النووية. وشعبة التطبيقات الإشعاعية وتهتم بتطبيقات الإشعاع النووي .

حقائق حول قسم الهندسة النووية

نفتخر بما نقدمه للمجتمع والعالم

9

المنشورات العلمية

11

هيئة التدريس

109

الطلبة

0

الخريجون

من يعمل بـقسم الهندسة النووية

يوجد بـقسم الهندسة النووية أكثر من 11 عضو هيئة تدريس

staff photo

د. كريمة محمد علي المصري

منشورات مختارة

بعض المنشورات التي تم نشرها في قسم الهندسة النووية

Determination of Dose Rates from Natural Radionuclides in Porcelain Dental Materials

There are three main aims that make this study particularly important and interesting to radiometric studies. Firstly, it will provides information on the concentration composition of natural and the associated man-made radioactivity of imported dental porcelain materials to be used by most dental laboratories in Great Jamahiriya. Since these materials do not pass radiation inspection tests before their entry or use and there is a large variety of supply source of these dental materials to be used for all dental works on Libyan patients, anomalies can be identified easily. Secondly, the analysis of selective elemental abundance (U, Th, and K ) and dose rate calculations may be used to calculate effective dose rates to dental laboratory technicians and also to the patient who will be using these specific materials. This research project will provide the first results of such measurements and the corresponding average annual effective dose rates equivalent to the patients using these materials and also to the dental technician and doctors work in the various dental laboratories that make use of these materials in their daily work. A total number of 30 dental powder samples were collected from a number of dental laboratories around Tripoli area will be analyzed. In this research project, the results from this preliminary survey regarding Th, U and K elemental concentrations in a wide variety of dental materials by means of high-resolution X-ray spectrometry will be presented. Further results from these investigations concerning activity concentrations and the associated dose rates, effective dose and the committed dose due to the use of these materials are going to be calculated and compared with other published data elsewhereandrecommendationoftheirusewillbederivedaccordingly. arabic 10 English 74
Karima Mohamed Ali Elmasri, Nouri A. Droughi(9-2010)
Publisher's website

A 3-D Numerical Study of Fluid Flow and Heat Transfer of Multiple Laminar Jets in Crossflow

Abstract: In this study, a three dimensional computer code based on the so called SIMPLE algorithm (which stands for Semi-Implicit Method for Pressure-Linked Equations) developed by McGill University-Montréal-Canada is used for the numerical solution of a laminar fluid flow and heat transfer of impinging four jets in the presence of crossflow with constant temperature boundary condition on the impingement surface. The governing equations solved by the computer code are the continuity equation, three components of the momentum equation and the energy equation. The finite volume method is adopted for the discretisation of the governing equation. In the computer program, the finite difference equations are solved via the primitive pressure-velocity approach where the hybrid difference scheme, which is a combination of the central and upwind differences, is used to represent the convective and diffusive fluxes over the control volume surfaces. The results obtained show that in general, for multiple jets, the induced and imposed crossflow have significant effects on both the flow and temperature fields near the impingement surface. A strong crossflow deflects the jet and prevents it from impinging on the surface resulting in lower heat transfer rates and hence lower temperatures difference.The results also show that reducing the jet separation distances causes an increase of the temperature of the flow, and hence better cooling of impingement surface.
إبتسام عمارة (2008)
Publisher's website

Monte Carlo modeling of 6 MV photon beam produced by the elekta precise linear accelerator of Tripoli medical center using beamnrc/dosexyznrc

The 6MV photon beam production by the Elekta Line accelerateur of Tripoli of medical center (TMC) was modeled using Beamnrc and Dosexyzne Monte Carlo codes. The Beamnrc code was used to model the accelerator head and generate phase files. The phase space files were then used as input to the Dosexyzne code to simulate octogenarian deth dose and beam profiles. simulation were first stared using nominal provided by the vendor, a field size of 10x10cm2 and Source to surface distance (SSD) of 100 cm. simulation were compared with experimental data and energy tuning procedures were applied to validate the model. Energy tuning procedures indicated that the nominal energy of 6 MV and a FWHM of the Gaussian distribution of the source of 0.35 cm were the optimal energy and FWHM for the model. The depth of maximum dose at 6 MV was found to be 1.5 cm. The percentage relative differences between calculated and experimental Pdd(s) ranged from 0.5% to 3% for field size of 10cm2 and reached a value of 8% at depths greater than 20cm, The model was later used to calculate PDD(s) and beam profile and output factors for different field size ranging from 3x3cm2 to 25x25cm2. Calculated output factors were in good agreement with experimental values (the percentage relative differences ranged from 1% to 4%). (Author) arabic 42 English 152
Karima Elmasri, Tawfik Giaddui(12-2012)
Publisher's website